GSK 82-25 USER MANUAL

Concentrating towel dispenser, auto hand dryer, dustbin into whole set, welded by imported high-class
stainless steel, to make proper and steady structure and elegant appearance, to fit your use in washroom,
bathroom, kitchen, and other pubic places.

Installation:
(A) The device is tumble-in design, drill holes on wall (size about  340mm(W) X 160mm(D) X 1620mm(H)  or
      13.4"(W) X 6.3"(D) X 63.8"(H), as drawing 1, use stay-bolt to fix this set and make sure outline is fitted
      to wall.

(B)  How to fit-on hand dryer
   1.  Before switching the power-on, must connect a two-pole switch, switch touch clearance > 3mm(0.1")
   2.  As drawing 2, take out screws on cover, open and remove yellow / green earth wire, connect
        power cord, which goes through two-pole switch, to relevant terminal.
   3.  Inset yellow / green earth wire to earth plug board on cover, then use screws to fix cover
   4.  Before switching it on, please check carefully if device is mounted firmly and wire connection is
       accurate.

Use Direction:
(A) Fold paper towel properly and put toward outlet to keep paper outgoing smoothly

(B) Use of hand dryer
  1.  It is on stand-by when power on, dryer automatically operates when hands are under outlet in
      11cm(4.3") distance, stops in 1 second when hands are left. Automatically cuts off when it blows
      continuously for 1 minute and reacts on re-detect.
  2. The factory set sensitivity of the infrared-ray switching sensor will be suitable for most situations.  
      During your use, please adjust sensor when it keeps working or not working.
  3. Easy to take out dustbin to clean.

Warning:
1. Avoid water spatting into dryer
2. Do not allow the air intake and outflow areas to become fouled
3. During use, when hand dryer is out of order, please cut off power immediately and consult our company or a
    qualified electrician.